"Windows cannot set up a homegroup on this computer"
I created a homegroup on a win 7 pro mach and am trying to join the homegroup from a win 7 starter netbook. I click "join" and enter the password and get the message "Windows cannot set up a homegroup on this computer".
All services are running, imsrv has been stopped, entries deleted from serviceprofiles, imserv restarted, firewall turned off, ipv6 enabled, rebooted, same problem.
any help appreciated
December 22nd, 2010 10:24pm
This worked for me.
On the laptop disable the wireless and enable the lan.
Plug the lap into the wired lan and see if you can join. (I always can).
If you join just disable the wired and enable the wireless.
It may work just pluging into the wired lan, just have not tried.
Free Windows Admin Tool Kit Click here and download it now
December 23rd, 2010 10:00am
Gave it a try, but no joy, thanks for the reply.
December 23rd, 2010 11:08am
Hi,
Please try the following suggestions:
1.
Go to “Control Panel\All Control Panel Items\HomeGroup” and click “Start the HomeGroup troubleshooter” link to check the issue.
2. Are you connected to the network?
a) Click on the network icon in the notification area of your taskbar.
b) Click the network you want to connect to and click Connect.
You might be required to enter a network security key.
After you've connected to the network, you can join a home group if one exists on your network.
3. Is your network location set to Home network?
Home Group only works on networks set to the Home network location.
To change the network location, follow these steps:
a) Go to start -> Control panel
b) Type network in the search field.
c) Click on Network and Sharing Center.
d) Select Work network or Public network, and then click Home network.
4. If you are on a domain network, your system administrator might have turned off Home Group completely, and so you won't be able to join a home group.
5. One or more required services are not running. The Peer Networking Grouping and Home Group Provider services must both be running. Here's how to check this:
a) Open Administrative Tools by clicking the Start button , and then clicking Control Panel. In the search box, type administrative tools, and then click Administrative Tools.
b) Double-click Services. If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
c) In the Status column, next to the Peer Networking Grouping and Home Group Provider services, you should see the word Started. If you don't see this, double-click the name of the service, and then click Start.
6.
Please also try the methods in the following link:
Why can’t I join a homegroup?
7. Please boot in
Clean Boot
to test this issue.
Regards,
Sabrina
TechNet Subscriber Support
in forum.
If you have any feedback on our support, please contact
tngfb@microsoft.comThis posting is provided "AS IS" with no warranties or guarantees, and confers no rights. |Please remember to click Mark as Answer on the post that helps you, and to click Unmark as Answer if a marked post does not actually answer your question.
This can be beneficial to other community members reading the thread.
Free Windows Admin Tool Kit Click here and download it now
December 23rd, 2010 10:01pm
This is another fix that works when the above fails. Even though my pc's show that my folders are shared I reshare on both machines and boom it works. I have found all kinds wierd homegroup stuff. For the most part it works fine.
December 24th, 2010 9:55am
I'm on a "Home" network. The Peer Networking Grouping and Home Group Provider services are both be running.
I've booted w/no startup items and only MS services running. It tells me there is a Homegroup available and click "Join now" and enter the password, then it says "Windows
cannot set up a homegroup on this computer".
Any other ideas?
thanks
Free Windows Admin Tool Kit Click here and download it now
December 24th, 2010 10:18am
It's no problem to share folders across the network, I just can't establish a Homegroup"
thanks
December 24th, 2010 10:19am
Hi,
Please let me know that if you have checked the following factors:
Network discovery is turned off.
To turn on network discovery, follow these steps:
1. Open Advanced sharing settings by clicking the
Start button, and then clicking
Control Panel. In the search box, type
network, click
Network and Sharing Center, and then, in the
left pane, click Change advanced sharing settings.
2. Click the chevron to expand the
Home or Work network profile.
3. Click
Turn on network discovery, and then click Save changes.
If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
For more information about network discovery, see
What is network discovery?
Please boot in
Clean Boot
to test this issue.
Regards,
Sabrina
TechNet Subscriber Support
in forum.
If you have any feedback on our support, please contact
tngfb@microsoft.comThis posting is provided "AS IS" with no warranties or guarantees, and confers no rights. |Please remember to click Mark as Answer on the post that helps you, and to click Unmark as Answer if a marked post does not actually answer your question.
This can be beneficial to other community members reading the thread.
Free Windows Admin Tool Kit Click here and download it now
December 26th, 2010 9:53pm
It was set to "Discover" but I unchecked it and then re-checked it, did a clean boot, but no luck.
I don't understand this problem, I'm sharing two non-public folders from the computer that established the homegroup, but I can't join the homegroup???
I appreciate your help
December 27th, 2010 8:52am
Hi,
Please let me know the detailed error code and error message which you received when trying to join in the homegroup.
Navigate to
the
idstore.sst in the following location C:\windows\serviceProfiles\LocalService\AppData\Roaming\PeerNetworking,
delete it, restart your computer. And then check the issue again.
If the issue still occurs, please check your adapter setting for IPv6. Your network connection must have IPv6 enabled
to create or join a homegroup. If it is disabled, follow the steps below to enable it.
1) Right click on the network icon and select Open the Network and Sharing Center.
2) In the resulting window, select Change adapter settings.
3) In the Network Connections window, select the Wireless Connection , then Change settings of this connection
or file>properties.
4) In the connection property page, check the box for Internet Protocol Version 6 (TCP/IPv6).
5) Close all the windows and reboot your system.
If the issue persists, please try creating a HomeGroup again.
Regards,
Sabrina
TechNet Subscriber Support in forum.
If you have any feedback on our support, please contact
tngfb@microsoft.comThis posting is provided "AS IS" with no warranties or guarantees, and confers no rights. |Please remember to click Mark as Answer on the post that helps you, and to click Unmark as Answer if a marked post does not actually answer your question.
This can be beneficial to other community members reading the thread.
Free Windows Admin Tool Kit Click here and download it now
December 28th, 2010 3:04am
Hi,
I would appreciate it if you could drop me a note to let me know the status of the issue.
If you have any questions or concerns, please feel free to let me know. I am happy to be of further assistance. :)
Regards,
Sabrina
TechNet Subscriber Support
in forum.
If you have any feedback on our support, please contact
tngfb@microsoft.comThis posting is provided "AS IS" with no warranties or guarantees, and confers no rights. |Please remember to click Mark as Answer on the post that helps you, and to click Unmark as Answer if a marked post does not actually answer your question.
This can be beneficial to other community members reading the thread.
December 29th, 2010 9:02pm
IPv6 running
deleted all entries at C:\windows\serviceProfiles\LocalService\AppData\Roaming\PeerNetworking
ran cjkdsk /f
rebooted
chkdsk ran with no errors reported
left the "Homegroup" on the win7 pro mach
created new homegroup on win7 pro
Click "join" on win7 starter
entered password
"joined Homegroup"
Success!
thanks for your help and patience.
Free Windows Admin Tool Kit Click here and download it now
December 29th, 2010 10:28pm
Hi,
Thank you for updating the status of our issue.
I am glad to hear that our issue was finally resolved. : )
Regards,
Sabrina
TechNet Subscriber Support in forum.
If you have any feedback on our support, please contact
tngfb@microsoft.comThis posting is provided "AS IS" with no warranties or guarantees, and confers no rights. |Please remember to click Mark as Answer on the post that helps you, and to click Unmark as Answer if a marked post does not actually answer your question.
This can be beneficial to other community members reading the thread.
December 30th, 2010 2:15am
Interesting responses all around.......
My situation is both systems running Windows 7 Home but both are wireless. I've tried all the above recommended solutions (except direct wire connection to the router - too much hassle for that!). Anyone come up w/ further solutions to this issue.
I thought Homegroup was Windows 7/Microsoft's answer to easy files sharing, etc. :-)
Thanks
Flavio
Free Windows Admin Tool Kit Click here and download it now
February 26th, 2011 11:29am
You should try the ethernet to router - it works brilliantly (but you must plug the computer you created the homegroup on in to the router)!
June 3rd, 2011 9:43pm
You should try the ethernet to router - it works brilliantly (but you must plug the computer you created the homegroup on in to the router)!
Free Windows Admin Tool Kit Click here and download it now
June 3rd, 2011 9:43pm